Black Box Network Hardware LGB1126A Manual De Usuario
724-746-5500 | blackbox.com
Page 52
724-746-5500 | blackbox.com
Chapter 3: Configuration
LGB1108A
3.2.2 Rate Limiters
This section describes how to configure the switch’s ACL Rate Limiter parameters. The Rate Limiter Levels from 1 to 16 permit the
user to set rate limiter value and units with pps or kbps.
user to set rate limiter value and units with pps or kbps.
Web Interface
To configure ACL Rate Limiter in the Web interface:
1. Click Configuration, ACL, then Rate Limiter
2. To specific the Rate field and the range from 0 to 3276700.
3. To scroll the Unit with pps or kbps
4. Click the Save button to save the setting
5. If you want to cancel a setting, click the Reset button to revert to previously saved values.
Figure 3-9. The ACL Rate Limiter Configuration screen.
Parameter Description
• Rate Limiter ID: The rate limiter ID for the settings contained in the same row.
• Rate: Permitted values are: 0–3,276,700 in pps or 0, 100, 200, 300, ..., 1,000,000 in kbps.
• Unit: Specify the rate unit. Values permitted are: pps (packets per second) and kbps (kilobits per second).
• Buttons:
- Save: Click to save changes.
- Reset: Click to undo any changes made locally and revert to previously saved values.