Bacharach PCA 3 Manual De Propietario
PCA
3 Manual
0024-9472 Rev 2
33
8. At this time, either return to Step 6 to choose another line to edit, or end
this procedure by highlighting Edit Complete and pressing the ENT key
to return to the Edit Test ID Menu.
to return to the Edit Test ID Menu.
9. Press ESC to go to the Test ID Menu or the RUN/HOLD key to return to
the Run/Hold screen.
Figure 4-13. Editing a Test ID
4.14.2. Selecting a Test ID
1. From the Test ID menu, use the
▲▼ buttons to highlight SELECT
TEST ID, and then press ENT to display the SELECT TEST ID menu,
which displays the first line of each Test ID record.
which displays the first line of each Test ID record.
Figure 4-14. Selecting a Test ID
2. Use the
▲▼ buttons to choose a pre-entered Test ID or choose NO
Test ID (located at bottom of list) to deselect a previously chosen
record, then press ENT to make the selection and return to the Test ID
menu.
record, then press ENT to make the selection and return to the Test ID
menu.
3. Press ESC to end the procedure and return to the Setup Menu or press
the RUN/HOLD key to return to the Run/Hold Screen.
4.14.3. Clearing Test ID Information
1. From the Test ID menu, use the
▲▼ buttons to highlight CLEAR TEST
ID, and then press ENT to display the CLEAR TEST ID menu.
2. Do one of the following to clear Individual Records or All Records.
Individual Records: Use the
▲▼ buttons to highlight Individual
Records, then press ENT to display the Clear Individual menu. Again
use the
use the
▲▼ buttons to highlight the individual record to clear, then
press ENT to clear the record.