Bacharach PCA 3 Manual De Propietario
PCA
3 Manual
0024-9472 Rev 2
53
5.12.4. Starting the Data Logging Process
After turning ON data logging and setting the interval and duration, the analyzer
will pause at the LOGGING SUMMARY screen, where the currently selected
interval and duration time periods are displayed.
will pause at the LOGGING SUMMARY screen, where the currently selected
interval and duration time periods are displayed.
Press
ENT
to start the combustion test and logging process. At this time the
Combustion Test LOG screen will appear, indicating that the analyzer is now
performing a combustion test and the data is being stored in memory.
performing a combustion test and the data is being stored in memory.
NOTE: At the top of the screen, the memory location where the
current log entry is being saved is displayed.
current log entry is being saved is displayed.
NOTE: If there were previously stored log entries, each new logging
session will start to store data in the next available memory location.
session will start to store data in the next available memory location.
NOTE: At no time will new data overwrite old data. Logging will
stop when available memory is filled.
stop when available memory is filled.
Figure 5-17. Starting the Data Logging Process
5.12.5. Ending the Data Logging Process
Data logging will stop and the pump will turn OFF after the prescribed duration,
or after all 500 memory locations are filled.
or after all 500 memory locations are filled.
To exit the Combustion Test LOG screen, press the
RUN/HOLD
button twice to
display the Combustion Test HOLD screen.
NOTE: To end the logging process at any time, press the ESC
button.
button.