HP Bluetooth Stereo Headphones Manual De Usuario

1. Perform a soft reset on your HP iPAQ Pocket PC by pressing 

the Reset button on the back or bottom of the device. For 
more information on performing a soft reset, refer to the 
User’s Guide that came with your HP iPAQ Pocket PC.

2. Backup your iPAQ Pocket PC using ActiveSync before 

installing the Headphones driver.

3. If the Bluetooth Radio on your Pocket PC is on, turn it off.

4. Establish a connection from your iPAQ Pocket PC to your 

desktop computer via ActiveSync. Refer to the User’s Guide 
that came with your iPAQ Pocket PC for instructions.

5. Place the CD that came with your HP iPAQ Bluetooth Stereo 

Headphones into an optical drive on your computer.

6. Click the button that reads “Click Here to Install Software” 

and follow the instructions on your screen. If asked to reset 
your Pocket PC, tap Reset Now.

7. Once the unit is reset, the driver is installed.

Before you can use the HP iPAQ Bluetooth Stereo Headphones, 
you must first pair them with an iPAQ Pocket PC with Bluetooth. 
To pair your headphones to a Pocket PC:

1. Make sure the batteries are charged on both the headphones 

and the HP iPAQ Pocket PC.

2. Make sure the headphones are turned off by pressing the 

Multi Function button in the center of the right earpiece of the 
headphones for about three seconds until the light flashes red 
and goes off.