Hoshizaki Modular Crescent Cuber KM-900MWF Manual De Usuario

22

DIP SWITCH NO.

1

2

3

4

5

6

7

8

9

10

        KM-900MRF/3      OFF   OFF    ON      OFF    ON      ON

  OFF     OFF    OFF     ON

        KM-900MAF,        OFF   OFF    ON      OFF    ON      ON      OFF     OFF    OFF     ON
        KM-900MWF

The Dip Switch is factory-adjusted to the following positions:

Switch Nos. 1 and 2:

Used for adjustment of the Defrost Timer.
The Defrost Timer starts counting when the Thermistor reads a certain temperature

           at the Evaporator outlet.

Switch Nos. 3 and 4:

Used for adjustment of the Drain Timer.
When a freeze cycle is completed, the Pump Motor stops, and the icemaker

           resumes operation in 2 seconds.  Then the Pump Motor drains the Water Tank
           for the time determined by the Drain Timer.  The Drain Timer also determines the
           time to restrain completion of a defrost cycle, i.e. the minimum defrost time.

Switch Nos. 5 and 6:

 Used for adjustment of the Drain Counter.
 The Pump Motor drains the Water Tank at the frequency determined by the Drain

           Counter.

Switch Nos. 7 and 8:
            Used only for checking the Controller Board.  Usually set in OFF position.

Switch Nos. 9 and 10:

Used for adjustment of Freeze Timer.
The Freeze Timer determines maximum
freeze cycle time.  Upon termination of
Freeze Timer, machine initiates the
harvest cycle.  After 2 consecutive timer
terminations, machine will shut down,
possibly indicating a problem.