Bil-Jax Personal Lift Cougar Lift Electric Hydraulic Lift Platform Manual De Usuario

The raise valve is a normally open (N.O.) valve in the hydraulic system. Perform the fol-
lowing procedures to check the operation of the raise valve. 

1.  Disconnect the black and yellow wires from the solenoid, to the valve at the 

wire connector, Figure 4-5. 

2.  On the upper control box, select 

UP

 on the direction selector switch while de-

pressing the 

ON

 pushbutton. This should cause the motor to run without the plat-

form raising. 

3.  If the platform raises, the raise valve must be cleaned or replaced. 

4.  Reconnect the wires at the connector between the solenoid and the raise valve 

upon determining that the valve is functioning properly. 

RAISE

VALVE

WIRE

CONNECTOR