Mazda CX-9 Guía De Instalación Rápida

Descargar
Página de 34
13
Blind Spot Monitoring
BLiND SPOT MONiTORiNg (BSM) SYSTEM (if equipped)
The Blind Spot Monitoring (BSM) system is designed to assist the driver 
by monitoring the blind spots to the rear of the vehicle on both sides.
 •   If your vehicle speed is 20 mph (32 km/h) or more, the BSM will warn
you of vehicles in the detection area by illuminating the BSM warning
lights located on the left and right door mirrors.
 •   If you operate a turn signal in the direction of an illuminated BSM  
warning light, the system will also warn you with a beeping sound and
warning light flash.
 •   BSM sensors are located under the left and right rear bumper areas.  
The BSM system may not operate properly if the rear bumper gets too
dirty, so keep the rear bumper area clean.
Please refer to your Owner’s Manual for complete details.
Your Vehicle
Detection Areas
NOTE: 
Do not rely completely on the BSM system and be sure to look over 
your shoulder before changing lanes: 
•  The BSM system can assist the driver in confirming the safety of the surroundings,
 but is not a complete substitute.
•  The driver is responsible for ensuring safe lane changes and other maneuvers.
•  Always pay attention to the direction in which the vehicle is traveling and the  
 vehicle’s surroundings.
•  The BSM system does not operate when the vehicle speed is lower than about  
 20 mph (32 km/h).
Turning BSM System Off
Turning the BSM system off will turn off both the light and sound indicators.
To manually turn the BSM system off, push the BSM OFF switch on the dash.
The BSM OFF indicator will illuminate in the instrument cluster when the BSM
system is off. The BSM system will automatically turn on the next time the
vehicle is started.
1406031_14a_Mazda_CX-9_SSG_071013.indd   13
7/10/13   9:03 AM