Braun 5281 Manual De Usuario

Descargar
Página de 3
 
4
5
In order to maintain the full capacity of 
the cell unit, it should be fully charged 
(5 hours) before the first use and then 
discharged by normal use until the 
trimmer runs distinctly slower.
Then recharge for 2 hours. This 
charging/discharging process should 
be repeated about every 6 months. All 
subsequent recharging also takes 2 
hours.
Fully charged, the appliance gives 
about 60 minutes of shaving.
 
Beard trimming
 
Place the distancing comb 
 
4
 
 on the 
beard trimmer while the switch 
 
2
 
 is 
turned off (= «0») and select the 
desired beard length.
The length can easily be selected with 
one hand (a). There are six length 
settings (2, 5, 8,11,14,18 mm); setting 
«6» is the longest beard length, 
setting «1» the shortest.
It is advisable to start with setting «6» 
and then reduce the setting until you 
reach the desired beard length. Hold 
the distancing comb with the angled 
edge against your beard (b). The 
distancing comb keeps the cutting unit 
at right angles while it combs through 
your beard. When giving your beard a 
more thorough trimming or when 
thinning out your beard, it is recom-
mended to guide the trimmer against 
the direction of beard growth.
 
Memory function
 
Your beard trimmer is provided with a
memory function (switch 
 
5
 
), to 
prevent you cutting your beard too 
short by using the wrong setting.
When you have found the right cut-
ting length, you can simply move the 
memory switch 
 
5
 
 to the right setting 
(1 - 6) (a). The motor will not start 
before the switch 
 
2
 
 has reached this 
setting. For longer settings, you can 
move switch 
 
2
 
 above the setting of 
the memory switch 
 
5
 
 and the motor 
will keep running.
The memory function is retained, even 
if the distancing comb 
 
4
 
 is removed 
and put on again.
Note: The distancing comb 
 
4
 
 can 
only be put on or taken off if the 
trimmer is turned off (switch set to 
«0»). When using for longer 
applications, clean the distancing 
comb with the brush 
 
6
 
 in between to 
avoid clogging it with hair (d).
The cutting unit 
 
3
 
 is for trimming 
hairlines, shaving off single hairs, or 
shaping beards (c). For these 
applications, the trimmer is used 
without the distancing comb, and the 
same setting as the memory function.
 
Cleaning and maintenance
 
After every use, take off the distancing 
comb 
 
4
 
 and clean with the cleaning 
brush 
 
6
 
. Tilt and lift off the cutting unit 
 
3
 
 (e). Clean the appliance and the 
cutting unit with the cleaning brush 
(f, g). Press the cutting unit back on 
the appliance until it snaps in place.
Occasionally, take off the cutting unit 
 
3
 
 and oil sparingly (h).
 
Important
 
Buy only original Braun spare parts, 
especially when replacing the cord. 
Only this way you can be assured of a 
safe, close and efficient trim.
Subject to change without notice.
This product conforms to the 
EMC-Requirements as laid 
down by the Council Directive 
89/336/EEC.
 
Guarantee
 
We grant a 1 year guarantee on the 
product commencing on the date of 
purchase.
Within the guarantee period we will 
eliminate, free of charge, any defects 
in the appliance resulting from faults in 
material or workmanship either by 
repairing, or exchanging parts or 
exchanging the whole appliance as 
we may choose.
Not covered by this guarantee: 
damage arising from improper use, 
normal wear and defects which have a 
negligible effect on the value or 
operation of the appliance.
The guarantee becomes void if 
repairs are undertaken by 
unauthorized persons and if original 
Braun parts are not used.
The guarantee only comes into force if 
the date of purchase is confirmed by 
the dealer's stamp and signature on 
the guarantee card and registration 
card.
This guarantee extends to every 
country where this appliance is 
supplied by Braun or its appointed 
distributor and where no import 
restrictions or other legal regulations 
hinder or prevent service being given 
under guarantee.
Service under the guarantee does not 
affect the expiry date of the guaran-
tee. The guarantee on parts or entire 
appliances which are exchanged 
ends when the guarantee on this 
appliance expires.
In the event of a claim under this 
guarantee, hand in the complete 
appliance with the valid guarantee 
card to your dealer, or send both to 
the nearest Braun Customer Service 
Centre. 
All other claims including for damages 
resulting from this guarantee are 
excluded unless our liability is legally 
mandatory.
Those claims arising out of the sales 
contract with the vendor are not 
affected by this guarantee.
 
For UK only:
 
This guarantee in no way affects your
rights under statutory law.