Panasonic Arbitrator 360 Guía Del Usuario
4
Charging Pin / Matching ID
BATT (Battery Status)
Talk On (Green LED)
Antenna Connection
4
3
2
1
FCC Label
7
Main Cable Connection
6
Serial Number Label
5
DESCRIPION - Receiver
1
2
3
5
6
7
4
* # 2 Talk On LED
When TX triggers the recording of the
system, green LED lights on.
<Rear>
<Front>
<Bottom>
7
* # 3 Charging Status
Red LED – In charging
Green LED – Fully Charged
Connection with the system
- Power DC12V (Red), Power GND (Black): Power Cables to engine
battery.
- Audio Out (RCA Connector): Connects to “AUDIO IN 1” port in the
back of recorder.
- Trigger REC (Yellow): Connect to GPIO1 brown cable.
- GND (Black): Connect to GPIO black cable.
DESCRIPTION – Main Cable
Power
(Red)
(Red)
Power GND
(Black)
Audio Out
(RCA connector)
Trigger REC
(Yellow)
GND
(Black)
To Receiver
1A In-Line Fuse
# Important: These three ground wires have to be all connected together
- Power ground wire from TDSS-900-PNA, Trigger ground wire from TDSS-900-PNA,
and Ground wire of the Recorder GPIO.
and Ground wire of the Recorder GPIO.
GPIO GND