Panasonic Arbitrator 360 Guía De Operación
0
Description.of.the.Screen.Displays
.(continued)
1
Property.Section
You can check the information for the pictures in the
live mode, or for the recorded pictures. Click on a tab,
and the corresponding page will be displayed.
Info tab
Officers tab
Status tab
Snapshot tab
Bookmark tab
Classify/Case tab
Info.tab
Meta information is displayed.
①
②
③
.
GPS.information
The following information obtained from the GPS
will be displayed.
In Live mode, the displayed data are updated at
intervals that are set on the Radar/GPS screen in
Administrator Setup.
In Archive mode, the displayed data are updated
according to data sent from the Memory Card Video
Recorder.
SPD: Vehicle speed
LAT: Latitude. 00.000000N denotes north latitude,
SPD: Vehicle speed
LAT: Latitude. 00.000000N denotes north latitude,
and 00.000000S denotes south latitude.
LON: Longitude. 000.000000W denotes west
longitude, and 000.000000E denotes east
longitude.
Note
If the AG-CPD15P Memory Card Video Recorder is used,
the GPS information in Live mode may not be displayed
until the vehicle moves.
the GPS information in Live mode may not be displayed
until the vehicle moves.
.
Radar.information
The following information obtained from the radar
gun will be displayed.
In Archive mode, the displayed data are updated,
according to data sent from the Memory Card Video
Recorder.
OWN: Speed of your vehicle
TGT: Speed of the target vehicle
TGT.(setting): Speed of a target vehicle that has
OWN: Speed of your vehicle
TGT: Speed of the target vehicle
TGT.(setting): Speed of a target vehicle that has
been set in the Memory Card Video Recorder.
If the TGT value exceeds this setting value, a
trigger event will be generated.
Notes
TGT (setting) is displayed only when Trigger 15
or Trigger 16 is set to TGT(REC), TGT(P1REC),
TGT(P2REC), or TGT(P3REC) are set to TGT on the
Triggers screen in Administrator Setup.
(See "Triggers," page 110.)
TGT (setting) is not displayed if Connection of Radar is
set to OFF on the Radar/GPS screen.
(See "
or Trigger 16 is set to TGT(REC), TGT(P1REC),
TGT(P2REC), or TGT(P3REC) are set to TGT on the
Triggers screen in Administrator Setup.
(See "Triggers," page 110.)
TGT (setting) is not displayed if Connection of Radar is
set to OFF on the Radar/GPS screen.
(See "
•
•
.
Trigger.information
The GPI input status is displayed when Trigger is
set to ON and the trigger name is specified on the
Trigger screen in Administrator Setup.
If the number of connected GPI is up to 8, the
status is displayed in 4 lines and 2 rows. If the
number of connected GPI is more than 8, the status
is displayed in 4 lines and 4 rows. The GPI channel
number and trigger name are displayed like "GPI
channel number : trigger name" in each cell.