Patton electronic 3086FR Manual De Usuario
2
GoCard
__
What are the Key Features and Benefits of the Model 3086FR?
Key Features
Benefit
Simultaneous Frame Relay to ATM
conversion, routing and multi-
protocol encapsulation
Supports for both FRF.5 and FRF.8 Interworking Agreements for non-
routed FR to ATM conversion. Use the IP router to route from any-to-
any port using Ethernet, PPP, FR, or ATM encapsulation.
any port using Ethernet, PPP, FR, or ATM encapsulation.
Offers both services simultaneously!
Advanced IP routing features
Powerful features include IP routing, NAT/NAPT, DNS, Firewall/IDS,
and DHCP making shared Internet connectivity simple, secure and
easy.
easy.
Dual Simultaneous
User Interface Ports
Customers have a 10/100 Ethernet port and either a serial or T1/E1
port for simultaneous transmission over the same DSL line.
port for simultaneous transmission over the same DSL line.
Bandwidth for each port is user configurable. Each port can be
shutdown if required.
shutdown if required.
FlexIP™ technology eliminates the
need for multiple pieces of
equipment at the customer premise
to provide multiple service
Patton’s FlexIP™ technology transports simultaneously the serial
frame relay data from any serial device and the IP data from the
3086’s Ethernet port over a single DSL connection. For simultaneous
serial and IP data, the 3086FR IAD operates in “split DSL bandwidth
3086’s Ethernet port over a single DSL connection. For simultaneous
serial and IP data, the 3086FR IAD operates in “split DSL bandwidth
mode,” so it is sharing one DSL connection for both types of data.
User selectable Standards-based
G.SHDSL
The DSL port meets ITU-T standard G.991.2 including Annex A and
Annex B operation and supports G.Handshaking (G.994.1).
Annex B operation and supports G.Handshaking (G.994.1).
High-speed 2-wire DSL from 64kbps
to 2.3 Mbps
Support for nx64 kbps for n = 1 to 36 and ix8 kbps for I = 0 to 7 per
G.991.2.
G.991.2.
Long Reach DSL
Using just 2 wires of ordinary twisted pair telephone wire, the
3086FR can reach distances greater than 30,000 ft (9 km).
Auto-sensing 10 or 100BaseT and
full or half-duplex Ethernet.
No configuration necessary, just Plug your Ethernet connections in
and Play.
10/100 Ethernet with
MDI-X
Eliminate the need for crossover Ethernet cables with the built-in
MDI-X crossover switch. Easily connect to any computer or
hub/switch with any available Ethernet cable.
MDI-X crossover switch. Easily connect to any computer or
hub/switch with any available Ethernet cable.
Flexible management options
A built in Web/SNMP management system allows the operator to
configure the 3086FR locally and remotely, manage each DSL link,
and perform initial test loops all with just a web browser. Setup is
and perform initial test loops all with just a web browser. Setup is
likewise a snap with the command line interface (CLI) accessible via
either the VT-100 console port or a telnet session. Manage the unit
from anywhere in the world through an IP network.
either the VT-100 console port or a telnet session. Manage the unit
from anywhere in the world through an IP network.
Convenient desktop modem
Patton packs all these features including an internal power supply in
a small compact package that makes this product easy to fit into
almost all customer environments.
almost all customer environments.
Front mounted LED’s
Front mounted LED’s provide a quick look at the 3086FR status.
LED’s provide information on Power, DSL port status, WAN status and
LED’s provide information on Power, DSL port status, WAN status and
Ethernet status.