BMW 2010 M6 Convertible Manual De Propietario

riv

g ti

uni

iga

lity

The M Dynamic Mode is deactivated each time
the engine is started.

With the M Dynamic Mode activated, sta-
bilizing interventions are only carried out

to a reduced degree.

To maintain vehicle stability, drive with
DSC activated and the M Dynamic Mode

deactivated whenever possible.

Indicator lamp

The indicator lamp goes out shortly
after the engine is started. The indica-
tor lamp stays lit: M Dynamic Mode is

activated.
The indicator lamp lights up continuously and
the DSC indicator lamp flashes: the M Dynamic
Mode is active and controls the drive and brak-
ing forces.

Activating MDM

You activate the M Dynamic Mode with the
button on the steering wheel, refer to MDrive on
page

With the ignition switched on you can set
MDrive on the Control Display.
iDrive, for operating principle refer to page

"Settings"

Select "M Drive" and press the controller.

Select "Drivelogic:" and press the control-
ler.

You can also activate and deactivate the
M Dynamic Mode with the MDM button.

Deactivating MDM again

Press the button on the steering wheel or the
MDM button

again; the MDM indicator lamp

goes out.

Deactivating DSC*

To maintain vehicle stability, drive with
the system activated whenever possi-

ble.

When rocking free or starting off from deep
snow or on loose road surfaces, it can be useful
to briefly deactivate DSC.