The Speaker Company OM_MS21.2 Manual De Usuario

 
Our thanks for buying your new speakers from TSC.  We sincerely appreciate your confidence in 
us and our products.   
 
Please read this Owner’s Manual!  It contains many tips on getting your new speakers set up, 
connected, and sounding as good as they should.  We hope you find it clear, concise, and 
helpful.   
 
Again, thank you.  
 

 

 
You should save the carton and the inserts your speakers came in.  You may need to store or 
ship your TSC speakers in the future and the packaging is designed to protect them from 
damage.    
 
 

 
Subwoofer: The MS21.2 subwoofer can go almost anywhere around your computer/multimedia 
source.  The only limitation is the length of the cable that connects the remote controller to the 
subwoofer.   
  
Satellite Speakers: These can be placed in any convenient location.  The only limitation is the 
length of the wire that connects them to the subwoofer module.  For computer use, they should 
be placed to flank your video monitor.   
 
 

 
•  Connect the satellite speakers to the appropriate speaker outputs on the rear of the 

subwoofer module.   

o

  Find the red (positive or “+”) and black (negative or “-“) speaker terminals for the Left 

satellite speaker. 

o

  Insert the Left speaker wire’s positive conductor (usually blue or white) into the 

recess of the Left channel’s red terminal by pressing the red tab down, inserting the 
wire, and then releasing the tab.   

o

  Insert the Left speaker wire’s negative conductor (usually black) into the recess of the 

Left channel’s black terminal by pressing the black tab down, inserting the wire, and 
then releasing the tab.   

o

  Repeat these steps for the Right channel.  Remember to use the Right channel 

terminals and the speaker wire from the Right satellite.   

•  Connect the remote controller by inserting its cable into the round multi-pin DIN socket on the 

subwoofer module’s rear panel 

•  Connect a source (computer, portable media player, etc.) to the remote controller’s Audio In 

3.5 mm stereo plug.   

•  Plug the AC cord from the subwoofer module’s rear panel into a 110v wall plug.   

•  Turn your source and the tSc MS21.2 speaker system on.  

o

  Note that there are two AC switches.   

OM_MS21.2 

v04  11-07 

 

3