Sony Ericsson HVR-MRC1 Manual De Usuario

 

 

 

Issue 1 

 

Page 1 

 

© Sony United Kingdom Ltd  

 

March 2009 

 
 
This guide is designed for users and potential users of the HVR-MRC1 with HDV 
cameras.  A lot of this information will also be useful to HVR-DR60 users, although 
that is not covered in detail here.  Likewise, some information relating to using the 
memory recorder with DVCAM cameras is included, but these are not fully discussed 
here.  This document is not designed to replace the product manuals, as only the key 
features and settings are covered, so it is also likely to be useful to have the user 
manuals for the HVR-MRC1 and the relevant camera to hand. 
 
The level of integration between the memory recorder and the camera will largely 
depend on when the camera was introduced.  Older cameras were designed without 
knowledge of the memory recorder.  Newer cameras integrate more tightly and will 
include more features directly relevant to the memory recorder, such as a dedicated 
status display screen. 
 

 
The HVR-Z5E, HVR-Z7E and HVR-S270E all feature direct connections for the 
memory recorder.  The memory recorder can be clipped directly to these cameras with 
no need for cables or batteries.  The memory recorder will use an internal i.LINK 
connection to the camera, so while the memory recorder is connected the main 
i.LINK connection cannot be used. 
 

                    

 

 

Figure 1.  Images of HVR-MRC1 on back of the HVR-Z7E (left) and on the side 

of the HVR-S270E (right) 

 
For all other cameras, the memory recorder needs to be connected to the included 
i.LINK cradle, and an L-series battery (same as HVR-Z1E battery) or DC power