Brocade Communications Systems Switch 53-1001762-01 Manual De Usuario

show lldp neighbors

5

show lldp neighbors 

Displays LLDP information for all neighboring devices on the specified interface.

Synopsis

show lldp neighbors [interface tengigabitethernet slot/port detail]

Operands

interface

Use this keyword to specify the10 Gbps Ethernet interface using the following 
operand followed by the slot or port number.

tengigabitethernet

Specifies a valid 10 Gbps Ethernet interface.

Specifies a valid slot number.

Specifies a valid port number.

Displays all the LLDP neighbor information in detail for the specified 
interface.

Defaults

There are no default configurations for this command.

Command

Modes

EXEC mode

Description

Use this command to display LLDP information for all neighboring devices on the specified 
interface.

Usage

Guidelines

If you do not use the interface operand, only the mandatory TLVs are displayed.

Examples

To display detailed LLDP neighbor information on a specific interface:

switch#show lldp neighbors interface tengigabitethernet 0/8 detail

Neighbors for Interface Te 0/8

MANDATORY TLVs

===============

Local Interface: Te 0/8    Remote Interface: Te 0/8 (IF Name)

Dead Interval: 120 secs  Remaining Life : 100 secs Tx: 536  Rx: 535

Chassis ID: 0005.1e76.1020 (MAC)

Remote Mac: 0005.1e76.102c

OPTIONAL TLVs

==============

Port Interface Description: Te 0/8

System Name: sw0

System Description: Fibre Channel Switch.

System Capabilities: Switching Routing

System Capabilities Enabled: Switching

Link Prim: 257

Remote Protocols Advertised:  Multiple Spanning Tree Protocol

Remote VLANs Configured: VLAN ID: 1  VLAN Name: default

AutoNego Support: Supported Not Enabled

AutoNego Capability: 0

Operational MAU Type: 0

Link Aggregation Capability: Capable