Brocade Communications Systems Switch 53-1001762-01 Manual De Usuario

show mac access-group

8

show mac access-group

Displays the current MAC ACL mapping to interfaces.

Synopsis

show mac access-group [interface port-channel number | tengigabitethernet slot/port | vlan 
vlan_id] 

Operands

interface 

Specifies the interface for which to display the MAC ACL mapping.

port-channel number

Specifies the port-channel number. The range of valid values is 1–63.

tengigabitethernet

Specifies a valid 10 Gbps Ethernet interface.

Specifies a valid slot number.

Specifies a valid port number.

vlan vlan_id

Specifies the VLAN number. The range of valid values is 1-3583.

Defaults

There are no default configurations for this command.

Command

Modes

EXEC mode

Description

Use this command to display the current MAC ACL mapping to interfaces.

Usage

Guidelines

If you do not specify an interface, this command shows the mapping of MAC ACL to all interfaces.

Examples

To display the current MAC ACL mapping for 10 Gbps Ethernet interface 0/1:

switch#show mac access-group interface tengigabitethernet 0/1

Interface Te 0/1

   Inbound access-list is std_acl

To display the current MAC ACL mapping for interface VLAN 100:

switch#show mac access-group interface vlan 100

Interface Vl 100

   Inbound access-list is ext_acl

To display the current MAC ACL mapping for 10 Gbps Ethernet interface 0/7 where there is no ACL 
applied:

switch#show mac access-group interface tengigabitethernet 0/7

Interface Te 0/7

   Inbound access-list is not set

See Also

show running-config, show statistics