Brocade Communications Systems Switch 53-1001762-01 Manual De Usuario

Chapter

10

Internet Group Management Protocol Commands

clear ip igmp group

Clears information related to learned groups in the IGMP protocol module.

Synopsis

clear ip igmp group [A.B.C.D [interface tengigabitethernet slot/port | interface port-channel 
number | interface vlan vlan_id] | interface tengigabitethernet slot/port | interface port-channel 
number | interface vlan vlan_id]

Operands

Specifies the group address, as a subnet number in dotted decimal format 
(for example, 10.0.0.1), as the allowable range of addresses included in the 
multicast group.

interface 

Use this keyword to specify any of the following interfaces:

tengigabitethernet

Specifies a valid 10 Gbps Ethernet interface.

Specifies a valid slot number.

Specifies a valid port number.

interface 

Use this keyword to specify any of the following interfaces:

port-channel number

Specifies the interface is a port-channel. The range of valid values is 1-63.

interface 

Use this keyword to specify any of the following interfaces:

vlan vlan_id

Specifies which VLAN interface to display the snooping configuration related 
information. The range of valid values is 1-3583.

Defaults

There are no defaults for this command.

Command

Modes

Privileged EXEC mode

Description

Use this command to clear the group information in the IGMP database, including entries for either 
a specific group on all interfaces or specific groups on specific interfaces.

Usage

Guidelines

There are no usage guidelines for this command.

Examples

To clear information for all groups in the IGMP protocol:

switch#clear ip igmp group

See Also

none