Brocade Communications Systems Switch 53-1001762-01 Manual De Usuario

dot1x reauthMax

13

dot1x reauthMax

Sets the maximum number of times that a port attempts to reauthenticate.

Synopsis

dot1x reauthMax number

no dot1x reauthMax

Operands

number 

Specifies the maximum number of reauthentication attempts before the port 
goes to the unauthorized state. The range of valid values is 1-10.

Defaults

The default number of times that a port attempts authentication is two.

Command

Modes

Interface configuration mode

Description

Use this command to set the maximum number of times that a port attempts to reauthenticate 
before a port changes to the unauthorized state. Use the no dot1x reauthMax command to return 
to the default setting.

Usage

Guidelines

There are no usage guidelines for this command.

Examples

To set the maximum number of reauthentication attempts to 5:

switch(config)#interface tengigabitethernet 0/1

switch(conf-if-te-0/1)#dot1x reauthMax 5

To set the reauthentication maximum to the default value:

switch(config)#interface tengigabitethernet 0/1

switch(conf-if-te-0/1)#no dot1x reauthMax

See Also

none