Desa 598-1034-02 Manual De Usuario
© 2003 DESA Specialty Products™
598-1034-02
Wireless
Plug-In
Doorbell
System
Your doorbell system includes:
•
•
Two plug-in doorbell chimes
•
Two doorbell buttons/transmitters
with batteries
with batteries
•
Two hardware packs
To reduce the risk of electrical shock, this
equipment has a polarized plug (one blade is
wider than the other). This plug will fit in a po-
larized outlet only one way. If the plug does
not fit fully in the outlet, reverse the plug. If it
still does not fit, contact a qualified electrician
to install the proper outlet. Do not change the
plug in any way.
equipment has a polarized plug (one blade is
wider than the other). This plug will fit in a po-
larized outlet only one way. If the plug does
not fit fully in the outlet, reverse the plug. If it
still does not fit, contact a qualified electrician
to install the proper outlet. Do not change the
plug in any way.
1.
Plug-in the doorbell chime.
2.
Before mounting, test the doorbell range.
Plug-in the chime where you want to mount it
and temporarily place the doorbell button on the
doorjamb. Press the doorbell button.
and temporarily place the doorbell button on the
doorjamb. Press the doorbell button.
Press the doorbell button to verify that the
doorbell and chime work properly. If the chime
does not sound see the Troubleshooting guide
on page 4.
doorbell and chime work properly. If the chime
does not sound see the Troubleshooting guide
on page 4.
Operation
Push
Button
Doorbell Button
As shipped from the factory:
•
•
Both chimes will sound when either button is pushed. The system can be
changed so that one chime responds to the factory set door button, while
the other chime responds to a new customer setting.
changed so that one chime responds to the factory set door button, while
the other chime responds to a new customer setting.
•
See pages 2 and 3 to change codes and sounds.