BENDIX TCH-005-008 Prospecto
Technical
Bulletin
Bulletin No.: PRO-05-08
Effective Date: 12/15/80
Page: 1 of 2
Subject:
Automatic Slack Adjusters w/Quick Connect Yoke
Assembly
We would like to call your attention to the correct procedure for removal and installation
of the quick connect yoke assemblies incorporated on some Bendix automatic slack
adjusters. These assemblies are primarily used on Ford trucks.
of the quick connect yoke assemblies incorporated on some Bendix automatic slack
adjusters. These assemblies are primarily used on Ford trucks.
REMOVAL (Ref. Figure 1)
1. Loosen the brake chamber push rod lock nut.
2. Remove
retainer.
3. Turn the manual adjustment by means of the 3/8 in. square hole, in the direction
opposite to the arrow on the adjusting crank, until the yoke is clear of the push rod
adapter.
adapter.
4. Remove the slack adjuster from the foundation brake camshaft.