Bunn Ultra-1 Manual De Usuario

5

11.  Thoroughly rinse the hoppers 

and install them over the augers 

and cooling drums.

15.  Set the lid(s) on the hopper(s). 

Lift slightly and slide back or 

front for filling. 

16.  Plug in the hopper lid lamp 

cord(s).

17.  Assemble the drip tray.

12.  Slide the hopper(s) into place 

and push down until the hop-

per lock plunger snaps into 

place. For models without PAF, 

proceed to step 15.

10.  Install auger nose bushing into 

inside front of hopper.

14. Install PAF unit onto platform 

and plug power cord into rear 

of platform. Plug platform power 

cord into proper outlet. (Refer 

to PAF manual for water con-

nections)(Proceed to step 17)

9.  Align the auger shaft with the 

flat fin of the auger. Push the 

augers as far as they will go 

and rotate them so the flat fin 

is facing up.

13.  For models with PAF, install 

level probes into slots at top 

rear of PAF hoppers.

45246 072611