Brocade Communications Systems Brocade Backbone DCX 8510-4 Manual De Usuario
Brocade DCX 8510-4 Backbone Hardware Reference Manual
23
53-1002177-05
Chapter
3
Logging In and Configuring the Brocade DCX 8510-4
In this chapter
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Configuring the Brocade DCX 8510-4
The Brocade DCX 8510-4 must be configured before it is connected to the fabric, and all of the
configuration commands must be entered through the active CP blade. The Brocade DCX 8510-4
configuration includes the following parameters:
configuration commands must be entered through the active CP blade. The Brocade DCX 8510-4
configuration includes the following parameters:
•
IP address and subnet mask for the chassis
•
IP addresses, host names, subnet masks, and gateway addresses for both CP blades
•
Switch name
•
Domain ID for the Brocade DCX 8510-4 (optional)
•
WWN for the Brocade DCX 8510-4
The Brocade DCX 8510-4 WWN is initially set by the factory to match the license ID (which is based
on the chassis serial number). The WWN can be changed but the license ID cannot be modified.
on the chassis serial number). The WWN can be changed but the license ID cannot be modified.