West Elm Teak Bath Short Tower Instrucciones Para El Montaje
teak bath tower short
assembly instructions
Page 3 of 3
5568845 - 03.05.08
3. Insert the remaining legs (D) into the opening located at each corner of the top (C). Once the leg is
fully inserted, apply bolt (A) into the center hole of the top bracing as shown. Tighten fully using the
enclosed allen key. Align the holes from the leg with the corresponding holes on the center of the shelf
bracing (located on each corner). Apply bolt (B) into the center hole of the shelf bracing as shown.
Tighten fully using the enclosed allen key. Stand tower upright.
fully inserted, apply bolt (A) into the center hole of the top bracing as shown. Tighten fully using the
enclosed allen key. Align the holes from the leg with the corresponding holes on the center of the shelf
bracing (located on each corner). Apply bolt (B) into the center hole of the shelf bracing as shown.
Tighten fully using the enclosed allen key. Stand tower upright.
Allen key
A
D
Allen key
B
CARE INSTRUCTIONS
Hardware may loosen overtime. Periodically check that all connections are tight.
Wipe with a soft, dry cloth. To protect fi nish, avoid the use of chemicals and household cleaners.