Whynter Air Conditioner ARC-14S Manual De Usuario

17 |

P a g e

TROUBLESHOOTING

Problem

Possible Causes

Solutions

The portable air
conditioner does not
turn on



Power failure / outage.



The automatic switch, line

fuse, or breaker has been
tripped.



The power supply voltage is

too low.



The power cord is damaged.



The L.C.D.I. power plug for

the unit is tripped.



The internal water reservoir

is full.



Possible loose connection



Internal fuse has blown



Restore the power supply.



Flip the switch / change the fuse / turn the breaker

back on. Also note that you may have too many
appliances drawing power on one circuit, you may
need to move the other appliances to another
circuit.



Move the unit onto another circuit with the correct

voltage.



Contact Whynter Service Department. Only

authorized personnel should replace damaged
power cord or power plug.



Press the Reset button on the L.C.D.I. power plug.



Drain water from the air conditioner.



Contact Whynter Service Department

The unit turns on but
the compressor does
not turn on (the fan
runs but the unit is not
cooling)



The room temperature is

outside of the operational
tolerances of the unit.



The Cooling mode is not on.



The compressor has not

turned on yet because of its
time delay.



The set temperature is too

high.



The internal water reservoir

is full.



This unit is designed to work in ambient

temperatures of 64°F to 95°F.



Press the MODE button until the COOL light is

shown on the display.



Give the compressor 3 minutes to turn on after the

Cooling mode has been selected.



Set the air conditioner to a lower temperature. It is

recommended to set the temperature to at least
5°F of the ambient temperature.



Either manually drain the water by removing the

drain plug or allow the unit to exhaust the water
itself by running the fan only mode. Then cooling
will resume.