Bunn Beverage Dispenser JDF-4S Manual De Usuario

31

1. Install door cover by first plugging the

door harness connector into the machine

harness connector located at the bottom

of the machine door.

2. Install door cover.

3. Secure the door cover using 5 screws

provided.

4. Place refrigeration switch in the OFF po-

sition.

5. Connect water supply to machine. (See

Plumbing Requirements)

6. Connect power supply to machine. (See

Electrical Requirements)

7. Install bath tank fill tube over a nozzle as

shown.(See Initial Fill)

8. Place the program switch in the ON po-

sition.

9. Hold the dispense switch until water be-

gins to flow into the tank (approx. 10 sec-

onds). When tank is full, water will begin

pour out of the overflow tube, Press the

dispense button to stop the flow of water.

10. Place the refrigeration switch in the

ON position and the program switch in the

OFF position.

11. Insert juice containers as shown.

12. Proceed to page 7 in the Operating and

Installation manual for calibration instruc-

tions and charts.

QUICK SETUP GUIDE - JDF-2S and JDF-4S (JDF-2S shown)

P3577

P3578

P3579

P3588

P3591

P3582

P3589

44744.2 062912