Bunn Single SH DBC* (with Smart Funnel) Manual De Propietario
Page 35
FACTORY DEFAULTS
This function allows the operator to erase all of the
previously entered recipes and ad messages. Factory-
set default values will replace all previous settings.
EXIT
EXIT
REPLACE
WILL REPLACE ALL
BREW SETTINGS
ARE YOU SURE?
NO YES
FACTORY DEFAULTS
NO YES
Procedure to set factory defaults:
1. Press and hold the ® pad until SET NEW RECIPES
appears. Release the ® pad. Press and release ®
until the display reads FACTORY DEFAULTS.
2. Pressing NO in this screen will revert to the MAIN
SCREEN. Press YES to replace the defaults. This
advances to WILL REPLACE ALL BREWING SET-
TINGS. This screen will alternate with ARE YOU
SURE?.
3. Pressing NO in the confirmation screen will revert
to MAIN SCREEN, without resetting the brewing
setups to the defaults. Press YES to load the de-
faults. This will then revert to the MAIN SCREEN,
and the factory default values will replace all
previously entered values. It will NOT reset the
summation Brew counter.
P2312
PROGRAMMING FUNCTIONS - LEVEL 2 (cont.)
FACTORY DEFAULT VALUES
Brew Lockout
YES
BREW VOLUMES:
Small Batch
64 oz.
Medium Batch
128 oz.
Large Batch
192 oz.
BYPASS PERCENTAGE:
Small Batch
0%
Medium Batch
20%
Large Batch
20%
PULSE BREW TIMES:
Small Batch
40 - 1st on; 10 - off; 5 last on
Medium Batch
OFF
Large Batch
OFF
PREINFUSION TIMES:
Small Batch
OFF
Medium Batch
OFF
Large Batch
OFF
DRIP OUT TIMES:
Small Batch
1:00
Medium Batch
1:30
Large Batch
2:00
ENABLE ADS
YES
BREW TEMPERATURE
200˚F (93˚C)
READY TEMPERATURE
195˚F (91˚C)
REFILL 155
SPRAY (OZ/MINUTE)
39.2
BYPASS (OZ/MINUTE)
24.1
FUNNEL DETECT
YES
SERVER DETECT
YES
34025 022509