Bunn Dual Dilution Manual De Propietario

8

  Pressing the ENABLE BREW (ON/OFF) switch pad will alternately turn the brewer on and off. Pressing this 

pad during the brew cycle will interrupt the brew cycle, stopping the flow of water. Pressing this pad during 

programming of the brewer will exit the setup and return to the main screen.

 

This hidden pad can be used to scroll backwards through the function list while in programming mode.

When the ENABLE BREW is ON and the brewer is on the main screen (not in programming mode), momen-

tarily pressing and releasing this pad will begin a brew cycle. These are also used to program the brewer when 

in the programming mode.

Pressing and holding this pad allows entry into the programming menus. Pressing and releasing the pad 

steps through each function screen while in the programming mode.

Pressing the pad corresponding to the Half or Full batch selects the amount of product to be brewed. Pressing 

a different pad after a brew cycle has been initiated does not change the brew batch in progress. Light indicates 

the selected batch to brew. Also used in programming to adjust settings on both batch sizes.

This is the display which shows the various functions of the brewer and allows the programming to be ac-

complished.

This is used to "receive" information from the Smart Funnel handle, recipe cards, and ad cards.

 

Digital:  This is used to select options (NO/-) that appear on the display during programming.

 Brewer:  This is used to select options (DONE) that appear on the display during programming.

 Control:  This is used to select options (YES/+) that appear on the display during programming.

D

B

C

A

F

E

G

D

B

C

A

F

E

D

B

A

F

A

E

E

G

C

G

C

H

36748.3 111010