Harbor Freight Tools 4 in. Handheld Dry_Cut Tile Saw Manual Del Producto
Page 11
For technical questions, please call 1-888-866-5797.
Item 62296
SAFETY
Op
ERA
TION
M
AINTENANCE
SETU
p
Operating Instructions
Read the ENTIRE IMpORTANT SAFETY INFORMATION section at the beginning of this
manual including all text under subheadings therein before set up or use of this product.
Tool Set Up
TO pREVENT SERIOUS INJURY FROM ACCIDENTAL OpERATION:
Make sure that the Trigger is in the off-position and unplug the tool from its
electrical outlet before performing any procedure in this section.
TO pREVENT SERIOUS INJURY FROM ELECTRIC SHOCK:
Do not use wet blades with this Tile Saw; it is not suitable for use with lubricant or water.
Mounting and Removing Blade
1. Slide Blade onto Inner Flange (3), making sure
the Blade is set so that the rotation arrow of
the blade is pointed in the same direction as
the arrow on the Tile Saw. See Figure A.
2. Slide Outer Flange (2) over Spindle (7) and
slide Locking Bolt (1) through Outer Flange.
See Figure A.
Note: This screw has left-hand threads.
Turn counterclockwise to tighten.
Screw
(1)
Outer
Flange (2)
Blade
(not included)
Inner
Flange (3)
Spindle
(7)
Figure A
3. Hold the Outer Flange and tighten the Screw
counterclockwise (left-hand thread) until
Blade is fastened securely. See Figure B.
Figure B