Bunn 392 Manual De Propietario

Page 5

1.  Insert a BUNN

®

 filter into the funnel.

2.  Pour the fresh coffee into the filter and level the bed of grounds by gently shaking.

3.  Slide the funnel into the funnel rails.

4.  Place an empty decanter beneath the funnel.

5.  Pour one pitcher of tap water into the screened area on top of the brewer.

6.  When brewing is completed, simply discard the grounds and filter.

1.  The use of a damp cloth rinsed in any mild, non-abrasive, liquid detergent is recommended for cleaning all 

surfaces on Bunn-O-Matic equipment.

2.  Check and clean the sprayhead.  The sprayhead holes must always remain open.

3.  With the sprayhead removed, insert the deliming spring (provided) all the way into the sprayhead tube.  

When inserted properly, no more than two inches of spring should be visible.  Push back and forth five or 

six times.

NOTE – In hard water areas, this may need to be done daily.  It will help prevent liming problems in the brewer 

and takes less than a minute.

40305  040307