Harbor Freight Tools 30 Watt 5_In_1 Hobby Woodburner Manual Del Producto
Page 9
For technical questions, please call 1-888-866-5797.
Item 38593
SAFET
y
Op
ERA
TION
M
AINTENAN
c
E
SETU
p
Operating Instructions
Read the ENTIRE IMpORTANT SAFETy INFORMATION section
at the beginning of this manual including all text under
subheadings therein before set up or use of this product.
Tool Set Up
TO pREVENT SERIOUS INJURy FROM AccIDENTAL OpERATION:
Make sure that the Trigger is in the off-position and unplug the tool from
its electrical outlet before adjusting tool or installing accessories.
Select the desired Soldering or Woodburning Tip and thread it onto the end base of the Woodburner.
Select the desired Soldering or Woodburning Tip and thread it onto the end base of the Woodburner.
Workpiece and Work Area Set Up
1. Designate a work area that is clean
and well lit. The work area must not
allow access by children or pets to
prevent distraction and injury.
2. Route the power cord along a safe route
to reach the work area without creating a
tripping hazard or exposing the power cord
to possible damage. The power cord must
reach the work area with enough extra length
to allow free movement while working.
3. Secure loose workpieces using a
vise or clamps (not included) to
prevent movement while working.
4. There must not be objects, such
as utility lines, nearby that will
present a hazard while working.
5. Clean the surface of the
workpiece to be soldered.
General Operating Instructions
1. Plug the Power Cord into the nearest outlet
and wait for Woodburner to heat up.
2. Cover the heated tip with rosin core solder
3. Use the iron to heat parts of
workpiece to be soldered.
4. Apply enough solder to heated parts.
5. Allow to cool undisturbed.
6. When finished, allow tool to cool
down completely. Do not touch
or remove tip while hot.
7. Once cooled, remove the tip
and replace with new tip.
NOTE: For woodburning, it is best to use woods
with fine grain patterns, such as walnut and
cedar. When working with leather craft, move tip
more quickly to prevent overburning of leather.
8. Clean, then store the tool indoors
out of children’s reach.