Black Box Switch PQ-8P Manual De Usuario

Take the following steps to enter 

a host download command.

1. Type the Command Pass-Thru

delimiter &% (or alternate CPT
start delimiter) in the document
at the point where the command
is to take effect.

2. Type an upper-case “Z”.

3. Type the command number for

the command to be used, as
shown in the table. Always use
two digits for the command
number (for example, &%Z05).

4. Type a comma.

5. Type the value representing the

desired selection. No spaces are
allowed. A space or invalid
character in a command causes
the PQ-8 to ignore the command
and resume printing from the
point the error occurred.

6. A space or control character

(NL, FF, CR, or LF) signals the
end of the download command.

7. Multiple commands can be

chained together by using a slash
(/) or backslash (\) to separate
the commands (no spaces
allowed).  For example, to set
the Default Print Quality
(Command 22) to NLQ (Value
1), Draft Printing (Command
23) to Fast Draft (Option 1), 
and the Wrap/Truncate Text
selection (Command 26) to
Truncate (Option 1), type:

&%Z22,1/Z23,1/Z26,1

shows the Host/PC

Download commands for the PQ-8
and corresponding command
numbers in alphabetical order.