Brother PT-2600 Manual De Propietario

The display can be made lighter or darker by selecting a setting between -2 and +2. (The 
default setting is 0.) 

Select a higher value to increase the contrast (make the display darker). 

Select a lower value to decrease the contrast (make the display lighter).

1

Press 

g, then Z.

2

Press 

l or r until CONTRAST is displayed.

3

Press 

u or d until the desired setting is displayed, and then press n.

With the Auto Reduction function, you can select whether the text width (TEXT 
WIDTH) or the text size (TEXT SIZE) will be reduced if text that is set to the AUTO 
Size setting is too large for the specified label length. (The default setting is TEXT 
SIZE.)

1

Press 

g, then Z.

2

Press 

l or r until AUTO REDUCTION is displayed.

3

Press 

u or d until the desired setting is displayed, and then press n.

If the length of the printed label does not correspond to the length specified with the 
Length function, the printed label length can be recalibrated with the Length Adjust 
function by selecting a setting between -5 and +5. (The default setting is 0.)

If TEXT SIZE is selected and more text is added, the character size is 
reduced so the text fits within the specified label length.

If TEXT WIDTH is selected and more text is added, the character width is 
reduced so the text fits within the specified label length.
However, after the character width is reduced to MINIMUM, the character 
size will be reduced so the text fits within the specified label length.

PT75007600us.book  Page 43  Wednesday, February 27, 2008  2:50 PM