Graco HUSKY 312877C Manual De Usuario
Installation
6
312877C
Installation
The Typical Installations shown in F
. 4 are only guides for selecting and install-
ing system components. Contact your Graco
distributor for assistance in planning a system
to suit your needs.
distributor for assistance in planning a system
to suit your needs.
Tighten Fasteners Before Setup
Before using the pump for the first time, check
and retorque all external fasteners. Follow
Torque Instructions, page 16.
and retorque all external fasteners. Follow
Torque Instructions, page 16.
TOXIC FLUID OR FUMES HAZARD
Toxic fluids or fumes can cause serious injury or death if splashed in the eyes or on
skin, inhaled, or swallowed.
Toxic fluids or fumes can cause serious injury or death if splashed in the eyes or on
skin, inhaled, or swallowed.
•
Read MSDS’s to know the specific hazards of the fluids you are using.
•
Route exhaust away from work area. If diaphragm ruptures, fluid may be exhausted
with air.
with air.
•
Store hazardous fluid in approved containers, and dispose of it according to appli-
cable guidelines.
cable guidelines.
•
Always wear impervious gloves when spraying or cleaning equipment.
BURN HAZARD
Equipment surfaces and fluid that’s heated can become very hot during operation. To
avoid severe burns:
Equipment surfaces and fluid that’s heated can become very hot during operation. To
avoid severe burns:
•
Do not touch hot fluid or equipment.
•
Wait until equipment/fluid has cooled completely.
PERSONAL PROTECTIVE EQUIPMENT
You must wear appropriate protective equipment when operating, servicing, or when in
the operating area of the equipment to help protect you from serious injury, including
eye injury, inhalation of toxic fumes, burns, and hearing loss. This equipment includes
but is not limited to:
You must wear appropriate protective equipment when operating, servicing, or when in
the operating area of the equipment to help protect you from serious injury, including
eye injury, inhalation of toxic fumes, burns, and hearing loss. This equipment includes
but is not limited to:
•
Clothing and respirator as recommended by the fluid and solvent manufacturer
•
Protective eyewear, gloves, and hearing protection
WARNING