Benq cp270 Manual De Usuario
Operation
38
Shutting down the projector
1.
Press
Power and a confirmation message
displays prompting you.
If you don't respond in a few seconds, the
message will disappear.
If you don't respond in a few seconds, the
message will disappear.
2.
Press
Power a second time. The POWER
indicator light flashes orange, the projection
lamp shuts down, and the fans will continue to
run for approximately 90 seconds to cool down
the projector.
lamp shuts down, and the fans will continue to
run for approximately 90 seconds to cool down
the projector.
3.
Once the cooling process finishes, the POWER
indicator light is a steady orange and fans stop.
indicator light is a steady orange and fans stop.
4.
Disconnect the power cord from the wall
socket if the projector will not be used in an
extended period of time.
socket if the projector will not be used in an
extended period of time.
•
To protect the lamp, the projector will not respond
to any commands during the cooling process.
to any commands during the cooling process.
•
To shorten the cooling time, you can also activate
the Quick Cooling function. See
the Quick Cooling function. See
for details.
•
Do not unplug the power cord before the projector shutdown sequence is complete or
during the 90-second cooling down process.
during the 90-second cooling down process.
•
If the projector is not properly shut down, to protect the lamp, when you attempt to re-start
the projector, the fans will run for a few minutes to cool down. Press Power again to start
the projector after the fans stop and the POWER indicator light turns orange.
the projector, the fans will run for a few minutes to cool down. Press Power again to start
the projector after the fans stop and the POWER indicator light turns orange.
I
I
I
I