Gilson 508 Manual De Usuario

Gilson 508 Interface Module User’s Guide

2-3

Refer to the diagram below to connect the 508 to another Gilson instrument 
using a GSIOC cable.

With additional GSIOC cables, you can connect as many as 32 devices. To connect 
additional GSIOC cables, connect the male connector to the next cable’s female 
connector (use the female connector that’s not joined to the male connector). 
Then connect the remaining female connector to the GSIOC port of the device. 

Cables should be arranged in a linear fashion. Any “Y-branching” from the main 
GSIOC cable may increase noise.

After you’ve made all the necessary connections, attach the power connector to 
the POWER input of the interface module and the transformer to a wall outlet. 
Since the interface module is designed to be left on at all times, it does not have 
a power switch. If you prefer to have a power switch, a switched power outlet 
strip is recommended.

The Power light indicates that power is being supplied to the unit.

Locate the Euro Plug Adapter (part number 594505121) supplied with the 508 
Interface Module. If necessary, attach to the power cord to connect the interface 
module to an AC power source.