GE General Electric Oxygen Equipment PT878 Manual De Usuario
Chapter 3. Programming Site Data
Transport® Model PT878 Portable Liquid Flowmeter User’s Manual
35
3.3 Entering Pipe Parameters (cont.)
•
To confirm the entries and return to Operate Mode, press
[F3]
(OK).
•
To leave the window without confirming the entries, press
[F2]
(Cancel)
or the
[ESC]
key.
In either case, the PT878 returns to Operate Mode.
•
To return to the Pipe tab and scroll to other windows, press the [
S
] key.
3.4 Entering Pipe Lining Parameters
To enter the Lining option, scroll to the Lining entry on the Program Menu
and press
and press
[ENTER]
. (From the Pipe window, you can scroll back up to the
Pipe tab and press the [X] arrow key to reach the Lining window, and press
[ENTER]
.) The screen appears similar to Figure 18 below. To step through
each parameter, press the [T] key. While programming, refer to Figure 144
on page 228 of Appendix A, Menu Maps.
on page 228 of Appendix A, Menu Maps.
Note:
The Lining option is only available for clamp-on transducers.
Figure 18: Pipe Lining Window
Transducer
Pipe
Path
Transducer/Pipe
Cancel
OK
Lining
Material
Tar/Epoxy
Sound Speed
2000
mm
Thickness
m/s
0
Fluid