Belkin SPEEDSTREAM 4200 Prospecto

Step A

If you have not already done so please connect the SpeedStream 4200 

modem directly to your computer with a network cable (Ethernet), ensure 

your Internet connection is working. If you are having any problems 

setting up the Optus-provided SpeedStream 4200 modem, you will need 
to contact the Optus ADSL support line. 

Step B

After you have confi rmed that your Internet connection is set up and you 

can browse the web, you will need to follow the remaining steps in this 

document.  Log into the modem by opening up Internet Explorer on your 
PC and type http://10.1.1.1 in the address bar and press enter.

Step C

Click on “Setup” in the menu on the left, then click “Mode”. 

Step D

Under “Select the operation mode” select NAPT and click Apply. 

Step E

Click on OK to save settings then click the Reboot button to restart the 

modem.

Step F

Wait approximately 2 minutes, then close your web browser.  This is 

usually done by clicking the cross on the top right hand corner of the 

screen.

Step G

Restart your web browser and ensure you can surf the internet, then 

close your browser and continue with this guide.

Siemens Speedstream 4200

N1 Wireless Router

Quick Installation Guide

1   Hardware Connections

�����

������

��������

Step A

Unplug your modem’s power cord.

Put the Router next to the modem.

Raise the Router’s antennas.

Step B

Locate the networking cable that connects your modem and 

computer.

Unplug that cable from your modem, and plug 

it into any gray port on the back of the 

Router.

Step C

Find your new networking cable (it came in the box with your 

Router) and connect it to the yellow port on the back of 

the Router.

Connect the other end to your 

modem, in the port that’s 

now free.

Note: If you are using an Optus provided ADSL service and you are using a 

D-Link or Siemens modem provided to you by Optus (not purchased by you 

in a retail store), please refer to pages 3 and 4 of this installation guide.

If you are not using Optus ADSL, continue on this page.

N1 Wireless Router

Installation Software CD

Ethernet Cable

Power Supply

User Manual on CD

Open and remove 

contents of box. You will 

fi nd the following items:

Hardware Connections:
Use the instructions in this 

Guide to connect your router, 

computer, and modem.

Setup Assistant:
Insert the CD into your 

computer and follow the 

on-screen instructions.

Finish:
You’re ready to surf the 

internet.

1

2

3

Thankyou for purchasing a Belkin router, you will need to run through the 

following steps once to set up your router.

© 2006 Belkin Corporation. All rights reserved. All trade names 

are registered trademarks of respective manufacturers listed.

P75168au

F5D8231au4