GE Magnetic Swipe Card Reader TS0861 Manual De Usuario
Description
The TS0861 Magnetic Swipe Card Reader is designed to
mount on metal window or door frames (mullions or
architraves) and is suitable for any indoor location that
requires a small reader.
mount on metal window or door frames (mullions or
architraves) and is suitable for any indoor location that
requires a small reader.
The TS0861 incorporates all interface electronics necessary
to interface to the TS0862 Smart Door Controller. The
reader operates on +5VDC supplied directly from the
TS0862.
to interface to the TS0862 Smart Door Controller. The
reader operates on +5VDC supplied directly from the
TS0862.
The TS0861 may also be used with other suitably-configured
products that have a Wiegand interface, including the
TS0867 4-Door Controller, TS0802 8-Area Arming Station,
and third-party devices.
products that have a Wiegand interface, including the
TS0867 4-Door Controller, TS0802 8-Area Arming Station,
and third-party devices.
Dimensions
Installation
Overview
Overview
Details will vary when
installing to other
interfaces.
installing to other
interfaces.
The overall process of installing the TS0861 and connecting
to a TS0862 Smart Door Controller is as follows:
to a TS0862 Smart Door Controller is as follows:
1. IMPORTANT — Set the pwr link on the TS0862 to +5
volts. Do not use any other voltage to power the TS0861.
2. Mount the TS0861 using suitable hardware.
3. Check for correct operation using a suitable Magnetic
3. Check for correct operation using a suitable Magnetic
Swipe Card.
TS0861 Magnetic Swipe Card Reader Installation Guide
2