GE Magnetic Swipe Card Reader TS0861 Manual De Usuario

Note — LED operation is configurable via the TS0862 Smart 
Door Controller. Refer to the TS0862 Smart Door Controller 
Installation & Programming Guide

 for details. 

The following process checks a typical installation of a 
TS0861 Magnetic Swipe Card Reader interfacing with a 
TS0862 Smart Door Controller.  

Check for correct operation: 

1.  Set the door to the ‘Access’ state and check that the 

Green LED (LED 1) is illuminated. 

2.  Swipe a suitable Magnetic Swipe Card through the 

TS0861. The Green LED flashes. 

3.  Set the door to the ‘Secure’ state and check that the 

Red LED (LED 2) is illuminated. 

4.  Swipe a suitable Magnetic Swipe Card through the 

TS0861. The Green LED flashes. 

TS0861 Magnetic Swipe Card Reader Installation Guide