Behringer Ultracoustic AT108 Manual De Usuario
5
ULTRACOUSTIC AT108 User Manual
2. Wiring Tips
Fig. 2.1 and 2.2 show you how to connect your guitar and your microphone to
the amplifier.
If you want to use an effects pedal (for example, the BEHRINGER X V-AMP)
If you want to use an effects pedal (for example, the BEHRINGER X V-AMP)
to experiment with some out-of-theordinary sounds, you can connect your guitar
directly to the input of the effects processor. Then, connect a second cable from
the effects output to the input on your amp.
If you have an electronic tuner, please be sure to insert it pre effects device,
If you have an electronic tuner, please be sure to insert it pre effects device,
so that the tuner only receives a dry signal without effects components.
X V-AMP: no additional tuner required.
X V-AMP: no additional tuner required.
◊
The built-in loudspeaker is disabled automatically when you
plug in the headphones
plug in the headphones
( 9 )
.Fig. 2.1: Setup example using the
ULTRACOUSTIC AT108
Microphone
Acoustic guitar
Headphone
Output
X V-AMP
BEHRINGER ULTRATONE AT108
HPS3000
CD player
PEDAL
CONFIGURE
BASS EQ
PRESENCE
GAIN
2ND FUNCTION
COPY
/ VOLUME
ADJUST
BYPASS/TUNER
1
2
3
4
Input
Instrument
input
CD input
Mic input
Fig. 2.1: Setup example using the ULTRACOUSTIC AT108
Fig. 2.2 shows a recommended setup for amplifying the sound of your AT108
using a sound reinforcement system of any size. This way, you can also use your
amp for playing live or for rehearsals with your band.
EP2000
EUROLIVE B1520 PRO
XENYX 2222FX
Acoustic guitar
Output
X V-AMP
BEHRINGER ULTRATONE AT108
PEDAL
CONFIGURE
BASS EQ
PRESENCE
GAIN
2ND FUNCTION
COPY
/ VOLUME
ADJUST
BYPASS/TUNER
1
2
3
4
Headphone
Main
Outputs
Instrument
input
Input
Fig. 2.2: Live setup