Gefen ex-tend-it 4x4 HDTV Matrix Manual De Usuario
6
DIP SWITCH GUIDELINES
Inside the 4x4 HDTV Matrix is a bank of Dip Switches. Below is a table describing their
functions. By default, all switches are set to the Off position.
functions. By default, all switches are set to the Off position.
Dip Switch #
Name
Description
1
Switching Delay
Adds a 3 second delay to switching
2
On Board EDID
Feeds a Generic HDMI EDID (720p/1080i)
to all Inputs
3
IR Code Dip Switch
Corresponds to Dip Switch 1 on RMT16-IR
4
IR Code Dip Switch
Corresponds to Dip Switch 2 on RMT16-IR
5
Unused
6
Unused
7
Unused
8
Edge Select
+Edge Pixels
How to open the 4x4 HDTV Matrix:
To access the dip switches, fi rst remove the 18 hex nuts on the back of the unit (16
located above each DVI port and 2 adjacent to the RS232 port). Remove the 5 Philips
screws under the unit and the 4 screws on each side of the unit. Now carefully remove
the cover of the 4x4 HDTV Matrix.
To access the dip switches, fi rst remove the 18 hex nuts on the back of the unit (16
located above each DVI port and 2 adjacent to the RS232 port). Remove the 5 Philips
screws under the unit and the 4 screws on each side of the unit. Now carefully remove
the cover of the 4x4 HDTV Matrix.
1
2
3
4
5
6
7
8