Hughes Inmarsat 3004090-0001 Manual De Usuario

The fixed mount kit includes two 30-m RJ-45 cables for Ethernet or integrated services digital network 
(ISDN) connectivity. You can also use a wireless LAN (WLAN) connection, depending on the distance 
from the computer and potential interference. For details, see the BGAN Terminal User Guide.

1. Use the provided 30-m extension power cable between the terminal and the AC/DC adapter power 

provided with the terminal. Connect the adapter to a power outlet.

2. If you install the terminal where temperatures may be extreme, remove the battery to prevent damage. 

The battery is needed only for portable use.

If you want to use power from a compatible solar panel, refer to the BGAN Terminal User Guide.

The terminal includes an integrated antenna. For optimum performance, the terminal must be accurately 
pointed at the satellite. The instructions in this section explain how to mechanically adjust the terminal’s 
elevation angle and azimuth. These adjustments are required for pointing. To point the terminal, refer to 
the BGAN Terminal User Guide. See the information on antenna pointing. The terminal must be powered 
ON for pointing.

To adjust elevation, refer to Figure 8:

1. Loosen the two bolts in the curved slots on the 

terminal bracket.

2. Read the elevation angle from the elevation scale on 

the terminal bracket, using the red edge on the pole 
collar as the angle indicator. View this edge through 
the curved slot on the terminal bracket.

3. Pivot the terminal on the pole to obtain the desired 

elevation angle.

Figure 8 - Adjusting elevation