Brother BAS-300G-484/484SF Manual De Propietario

4. PREPARATION BEFORE SEWING

KE-430D, BE-438D

3. For sewing patterns with a short bar tack length (10 mm

or less), the end of the thread that is being held by the

thread nipper may poke out from the seam on the

underside of the material. It is recommended that you

change the thread nipper setting to "OFF" for patterns

such as these.

4. If error [E690] or [E691] frequently occurs, remove the

needle plate and remove any thread scraps from

underneath the needle plate.

5. With the KE-430D, the lower thread may poke out from the underside of the material on the 2nd stitch for some types of

material and thread. If this happens, it is recommended that you use sewing patterns that are designed for use with the

thread nipper device.

Refer to "2-2. Program list (KE-430D)" for details of the sewing patterns.

Specifications

Standard

program No.

Program No. for

thread nipper device

1 65
4 66
5 67
8 68

13 69
15 70
20 71

For ordinary materials (-01)

21 72

2 78
3 79
6 80

14 81
16 82
17 83
18 84

For denim (-02)

19 85

7 73
9 74

22 75
31 76

For knitted materials (-07)

For foundation garments (-0F)

32 77

4487Q

(Front)

(Back)

Upper thread