Brother BAS-300G-484/484SF Manual De Propietario
6. USING THE OPERATION PANEL (ADVANCED OPERATIONS)
KE-430D, BE-438D
39
6-3. List of memory switches
No.
Setting
range
Setting items
Default
Work clamp/button clamp lift timing when sewing is complete
OFF
Lifts at the final stitch position.
001
ON
Lifts after moving to the home position.
OFF
2-step work clamp
OFF Disable
003
ON
Stops at intermediate work clamp height setting mode when foot switch is
depressed to 1st step, and then drops fully and sewing starts when foot switch is
depressed to 2nd step.
OFF
Sewing start speed
OFF
The sewing speed for the first 1 - 5 stitches is set by memory switch nos. 151 -
155.
(Refer to the Service Manual for details of memory switch nos. 151 - 155.)
100
ON
Refer to (*1) below.
*1
Single-stitch test feed
OFF
Test feed starts when the foot switch is depressed, and it continues automatically
until the final stitch.
200
ON
Test feeding is carried out stitch by stitch when the foot switch is depressed.
In addition, when the test indicator is illuminated, test feeding will move forward
one stitch at a time when the machine pulley is turned by hand.
*2
Production counter display
OFF
Lower thread counter display
300
ON
Production counter display
OFF
User programs
OFF Disable
400
ON
User program mode is enabled.
OFF
Cycle programs
OFF Disable
401
ON
When sewing user programs, the set programs are sewn in numeric order.
OFF
Units display for pattern zoom ratio (*3)
OFF
Displayed as %.
402
ON
Displayed as mm.
OFF
Thread clamp device
OFF Disable
500
ON
Thread clamp device can be used. (*4)
OFF
*1 Sewing start speed when the memory switch no. 100 is set to ON.
Specifications 1st
stitch
2nd stitch
3rd stitch
4th stitch 5th
stitch Default
KE-430D-02 400
800
3,200 3,200 3,200 OFF
KE-430D-01, -07
400
800
1,200 3,200 3,200 ON
KE-430D-0F 400 600 900 1,200
3,200 OFF
BE-438D
400 400 600 900 2,000 ON
*2 Off for KE-430D and ON for BE-438D.
*3 The mm display may differ slightly from the actual sewing size.
*4 May not operate if the settings for the memory switch nos. 151 and 152 have been changed, or at some sewing speeds.
(Refer to the Service Manual for details of memory switch nos. 151 and 152.)