Brother BAS-300G-484/484SF Manual De Propietario

6. USING THE OPERATION PANEL (ADVANCED OPERATIONS)

KE-430D, BE-438D

To record another cycle program, repeat steps 2 to 4.

End cycle program recording mode.

TEST indicator switches off

Menu indicators light

Press the TEST key.

This completes the recording of cycle programs.

• The cycle program number will flash in the PROGRAM

No. display, and the sewing machine will switch to

home position detection standby.

<Using a cycle program>

1. Press the or key (1) to select the cycle program

number that you would like to use.

• If the cycle program number is flashing, depress the

foot switch to move the feed mechanism to the home

position. After this, it is not necessary to detect the

home position until the next time the power is turned

off and back on, even if you change the cycle program

number.

• The cycle program number can be selected directly

by pressing function keys F1 to F4 (2). (Refer to “6-8.

Direct selection”.)

2. Check that the needle drop position is correct, and then

start sewing. (Refer to “5-5./5-6 Checking the sewing

pattern”.)

3. The recorded user program will be sewn step by step,

and when the final step is complete, the menu display

(3) will return to showing step 1.

• If you press the or key (4), you can return to the previous step or skip to the next step respectively. (You do not

need to carry out home position detection again.)

• If you press the SELECT key (5), you can check the details (such as X-scale, Y-scale and sewing speed) of the user

program for the displayed step. The setting cannot be changed at this time.

Note:

If cycle program sewing mode is active (when memory switch no. 401 is “ON”) but no cycle programs have been

recorded, the user programs will be sewn in numeric order.
“C-0” will appear in the PROGRAM No. display at this time.

4439Q

4442Q