Brother NC6100H Manual De Usuario
6 - 7 NOVELL NETWARE PRINTING
3
One or more print servers will appear in the list (the default node
names are
names are
BRN_xxxxxx
, where
xxxxxx
is the last six digits of
the Ethernet address (MAC address)).
4
Select the print server that you wish to configure and double
click it. You will be asked for a password. The default password
is
click it. You will be asked for a password. The default password
is
access
.
5
Select the NetWare tab.
a
If it is not already selected, select Queue Server as the
operating mode.
operating mode.
b
Click the Change Bindery Queues button.
c
Select the NetWare server which you wish to configure.
d
Select the New Queue button and type in the queue name
which you wish to create.
which you wish to create.
e
Once you have done that highlight the queue name you
created and click on the Add button.
created and click on the Add button.
f
Click on Close and then OK.
Now exit the BRAdmin application. You are ready to print.
You can find the node name and MAC address by printing
out the printer settings page. Refer to the Quick Setup Guide
for information on how to print the settings page on your print
server.
out the printer settings page. Refer to the Quick Setup Guide
for information on how to print the settings page on your print
server.
If necessary change the NetWare Print Server Name. The
default NetWare print server name will usually be
default NetWare print server name will usually be
BRN_xxxxxx_P1
where
xxxxxx
is the Ethernet address of
the print server. Be careful! Changing the name may impact
the configuration of other protocols because the print server
service names will be altered.
the configuration of other protocols because the print server
service names will be altered.