Baratza Virtuoso Manual De Usuario

Use the bristle brush (included with your grinder)  

to remove any loose coffee residue on the ring 

burr and the center cone burr mounted within the 

motor housing.  Wash the silicone seal in warm 

soapy water and dry. 

Ensure that the red tab on the adjustment ring lo-

cated inside the top of the grinder housing is posi-

tioned as shown in the picture at left.  If the red tab 

is not in the correct position, turn the adjustment 

ring counterclockwise as far as it will go.  Replace 

the burr by lining up the red tab on the burr with 

the red tab on the adjustment ring.  Wiggle and 

push down firmly on the ring burr to ensure that it 

seats properly.

After replacing the burr, replace the silicone seal by lining up the two 

slots in the silicone seal with the small tabs on the top of the ring burr 

and slide the seal onto the ring burr.

To replace the bean hopper, line 

up the two small tabs on the base 

of the hopper with their respective 

slots in the top of the grinder hous-

ing and insert the hopper into the 

grinder.  Once the hopper is in place 

rotate it clockwise to your desired