Brother FAX 1030e Manual De Usuario

You can set the beeper to LOW, HIGH or OFF. The machine comes set to LOW. When the beeper 
is set to LOW or HIGH, the machine beeps every time you press a key or make an error, and at the 
end of sending or receiving a fax.

Press Menu/Set, 1, 3.

Press 

 or 

 to select your setting.

When the screen displays the setting you want, press Menu/Set.

Press Stop/Exit.

You can adjust the speaker volume. If you have FAX-1020e, you must lift the handset, then press 
Tel before you can adjust the volume. If you have FAX-1030e, press Speaker phone.

Press 

 or 

 to adjust the volume level. The screen displays the setting you are choosing. Each 

key press changes the volume to the next setting. The new setting will remain until you change it 
again.

■ When you enter your name, see Entering Text, page 91.
■ The telephone number you enter is used only for the Call Back Message and 

Cover Page features. 

■ If you do not enter a fax number, no additional information can be entered.
■ To enter a space, press 

 once between numbers and twice between 

characters.

■ If your Station ID has already been programmed, the screen prompts “1” to 

make a change, or “2” to exit without changing.

If you have FAX-1030e, you can adjust the speaker volume while you are listening 
to your OGM (Outgoing Message) and ICMs (incoming messages).

If you turn Incoming Recording Monitor to OFF (Menu/Set, 8, 5) on FAX-1030e, 
the Speaker for screening calls will be disabled and you won’t hear callers leaving 
messages. The volume for other operations can still be controlled using  

and 

.