Brother DCP-770CW Manual De Usuario

Descargar
Página de 113
72
g
The machine will automatically reset the 
ink dot counter.
Note
• If you replaced an ink cartridge, the LCD 
may ask you to verify that it was a brand 
new one. (For example, 
Did You Change
Black
) For each 
new cartridge you installed, press (Yes) 
to automatically reset the ink dot counter 
for that colour. If the ink cartridge you 
installed is not a brand new one, be sure 
to press - (No).
• If the LCD shows No Cartridge after 
you install the ink cartridges, check that 
the ink cartridges are installed properly.
 
WARNING
 
If ink gets in your eyes, wash them out with 
water at once and call a doctor if you are 
concerned.
 
CAUTION
 
DO NOT take out ink cartridges if you do 
not need to replace them. If you do so, it 
may reduce the ink quantity and the 
machine will not know the quantity of ink left 
in the cartridge.
 
 
DO NOT touch the cartridge insertion slots. 
If you do so, the ink may stain your skin.
 
 
If ink stains your skin or clothing, wash with 
soap or detergent at once. 
 
 
If you mix the colours by installing an ink 
cartridge in the wrong position, clean the 
print head several times after correcting the 
cartridge installation.
 
 
Once you open an ink cartridge, install it in 
the machine and use it up within six months 
of installation. Use unopened ink cartridges 
by the expiration date written on the 
cartridge package.
 
 
DO NOT dismantle or tamper with the ink 
cartridge, this can cause the ink to leak out 
of the cartridge.
 
 
Brother multifunction machines are 
designed to work with ink of a particular 
specification and will work to a level of 
optimum performance when used with 
genuine Brother Branded ink cartridges. 
Brother cannot guarantee this optimum 
performance if ink or ink cartridges of other 
specifications are used. Brother does not 
therefore recommend the use of cartridges 
other than genuine Brother Branded 
cartridges or the refilling of empty 
cartridges with ink from other sources. If 
damage is caused to the print head or other 
parts of this machine as a result of using 
incompatible products with this machine, 
any repairs required as a result may not be 
covered by the warranty.