Brother P-Touch QL-570 Manual De Usuario

Potential types of problems

35

If the problems occur while using this machine, the following may help you to solve the problems.

Problem

Solution

• The QL-570 does not 

print, or a printing error is 
received.

• Is the USB cable loose? 

Check that the USB cable is connected correctly.

• Is the DK Roll installed correctly? 

If not, remove the DK Rolls and reinstall.

• Is there enough roll remaining? 

Check that there is enough roll remaining.

• Is the DK Roll compartment cover open? 

Check that the DK Roll compartment cover is closed.

• Is print error or transmission error occurred? 

Turn off the Brother QL-570 and on again. If the problem is still occurred, 
contact Brother Customer Service.

• The power button does 

not light up.

• Is the power cord plugged correctly? 

Check that the power cord is plugged. If plugged correctly, try plugging it to 
another electrical outlet.
* If the power button still does not light up, contact Brother Customer Service.

• The printed label 

contains streaks or poor 
quality characters, or the 
label is not fed correctly.

• Is the print head or roller dirty?  

While the print head generally remains clean under normal use, lint or dirt from 
the roller may become stuck on the printer head. If this occurs, clean the roller. 
See 

Î

• A data transmission error 

appears on the personal 
computer.

• Is the correct port chosen? 

Check that the correct port is chosen from the “Print to the following port” list in 
the Printer Properties dialog box.

• Is the QL-570 in cooling mode (the LED lamp is flashing in orange)? 

Wait until the LED lamp stops flashing and then try printing again.

• Labels are jammed in the 

cutter or are not ejected 
correctly after printing.

• Is there dirt or lint on the roller preventing it from rolling freely? 

Use a Cleaning Sheet to clean the roller. For details, see 

• Layout style is not 

updated when Add-in is 
still activated and a new 
label roll is installed.

• Is new label roll installed before activating the P-touch

®

 Add-In (The P-touch

®

 

function is added to your standard Microsoft

®

 toolbar)? 

Exit the P-touch

®

 Add-In, load the 2nd label roll type, reactivate the P-touch

®

 

Add-in, choose "Select Layout", and then verify the layout.

• The icon of  P-touch

®

 

Add-In is not displayed 
on Microsoft

®

 Word.

• Is Microsoft

®

 Outlook

®

 started up?

• Is Microsoft

®

 Word chosen for the editor usually used for Microsoft

® 

Outlook

®

? 

Due to limitation of the program, the Add-In of Microsoft

®

 Word is unable to use 

with above settings. Quit Microsoft

®

 Outlook

®

, and restart Microsoft

®

 Word.

• The DK Roll compartment 

cover does not close.

• Is the DK Roll installed properly?
• Is the link lever removed? Set the 

link lever properly.

• Link lever is removed.

• Set the link lever properly.

Link lever